碳纤维泡沫夹芯板

售罄
如有需要请联系客服!!
Size  
价格 ¥642.00
数量
更多图片
 

产品介绍

该碳纤维泡沫夹芯板,厚度5.85mm,最上面一层是3K-2/2斜纹碳纤维布,下面一层是无碱玻璃纤维布,与闭孔轻质泡沫芯材相组合,重量轻,刚度大。

该板由层压并真空加压成型,粘结强度好以及较低含胶量。这种工艺方法可以生产出两面光洁*的平板,而湿法手糊成型工艺则不能。

*注意,尽管此产品两面都光滑,但板的背面(黑色面)并非设计为装饰面,在搬运或裁剪等过程中有可能造成轻微划痕或瑕疵。

性能优点

泡沫芯材以最小重量达到足够厚的夹芯板;而传统的板子(无夹芯材料),相同抗弯强度下,重量会增加很多。

使用建议

夹芯板尺寸最大至2000mm×950mm,广泛用于各种领域:

  • 内饰
  • 汽车
  • 水上运动
  • 建筑
切割,修形和精加工

正如所有碳纤维复合材料(像玻璃钢、碳芳纶等)一样,使用正规的车间工具如钢锯、线锯和砂纸对此产品进行切割、修型和精加工都可以达到不错的效果。当然,更专业的工具会使得工作轻松且效果更好。

我们推荐使用Perma-Grit工具对碳纤维板进行剪切、修形。

产品规格

层压板组成

这种真空加压成型的泡沫夹芯板由以下几层组成:

  • 透明高光表面胶衣
  • 2/2斜纹 3K碳纤维布
  • 一层无碱玻璃纤维布
  • 厚度5mm的泡沫芯材
  • 一层无碱玻璃纤维布
  • 透明高光表面胶衣
  • 总厚度5.85mm (+/- 0.2mm)

产品规格

运输及配送信息

这款产品不属于危险品,不受运输限制。

技术问题


What weight can the sheet take? Could you walk across it if it covered a hole in the floor?

It's not possible to give an exact weight because it would depend on many things (how the sheet is supported, what the span in, how the weight it loaded, whether the sheet is a 'free span' (i.e. not bonded/fixed) or bonded or fixed (so you get a 'drum skin' effect). That said, you could be confident that a sheet slid over a hole such that the sheet is supported on all sides would support the weight of an average person quite easily.


What is the density of this material? What would 2m x 95cm sheet weigh?

The sheet weighs 2.6kg (2600g) per square metre. The 2m x 95cm sheet weighs 4.94kg.


What are the properties of the skins and foam?
Reply: The properties for the foam are the same as those for Airex C70/75, datasheets are readily available. The properties for the carbon fibre and glass used in the sheet we don't currently have data for but we are having mechanical property testing done on the finished foam core panel and our wet lay sheet which should be available soon.

Download Product Datasheets

Use the links below to download datasheets relating specifically to this product.

最近查看过的内容

碳纤维泡沫夹芯板 碳纤维泡沫夹芯板